Hwping Commands; Hwping-Agent Enable; Hwping - 3Com 5500G-EI Command Reference Manual

HWPing Commands

453
Example
Test the gateways passed by the packets to the destination host at 18.26.0.115.
<SW5500>tracert 18.26.0.115
tracert to allspice.lcs.mit.edu (18.26.0.115), 30 hops max
1 helios.ee.lbl.gov (128.3.112.1) 0 ms 0 ms 0 ms
2 lilac-dmc.Berkeley.EDU (128.32.216.1) 19 ms 19 ms 19 ms
3 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 19 ms 19 ms
4 ccngw-ner-cc.Berkeley.EDU (128.32.136.23) 19 ms 39 ms 39 ms
5 ccn-nerif22.Berkeley.EDU (128.32.168.22) 20 ms 39 ms 39 ms
6 128.32.197.4 (128.32.197.4) 59 ms 119 ms 39 ms
7 131.119.2.5 (131.119.2.5) 59 ms 59 ms 39 ms
8 129.140.70.13 (129.140.70.13) 80 ms 79 ms 99 ms
9 129.140.71.6 (129.140.71.6) 139 ms 139 ms 159 ms
10 129.140.81.7 (129.140.81.7) 199 ms 180 ms 300 ms
11 129.140.72.17 (129.140.72.17) 300 ms 239 ms 239 ms
12 * * *
13 128.121.54.72 (128.121.54.72) 259 ms 499 ms 279 ms
14 * * *
15 * * *
16 * * *
17 * * *
18 ALLSPICE.LCS.MIT.EDU (18.26.0.115) 339 ms 279 ms 279 ms
HWPing Commands
This section displays the hwping options available on your Switch 5500G-EI.

hwping-agent enable

Syntax
hwping-agent enable
undo hwping-agent enable
View
System View
Parameter
None
Description
Use the command to enable the HWPing client function.
hwping-agent enable
Use the undo hwping-agent enable command to disable the HWPing client
function.
Before you can perfrom a test, you must enable the HWPing client function.
Example
Enable HWPing Client.
[SW5500]hwping-agent enable

hwping

hwping administrator-name operation-tag
undo hwping administrator-name operation-tag