Display Ospf Error - 3Com 5500G-EI Command Reference Manual

190 C 6: U R
HAPTER SING

display ospf error

P C
OUTING ROTOCOL OMMANDS
Table 28 Output Description of the
Field
IO Statistics Type
Input
Output
ASE
checksum sum
LSAs originated
received
Router
SumNet
SumASB
Area Neighbors
Interfaces
Spf
rtr, net,
sumasb,
sumnet
Routing Intra Area
Table
Inter Area
ASE
Syntax
display ospf [
View
All Views
Parameter
Enter the process ID of OSPF, ranging from 1 to 65535. The command
process-id
is applied to all current OSPF processes if you do not specify a process ID.
Description
Use the
display ospf error
Example
To display the OSPF error information, enter the following:
<SW5500>display ospf error
OSPF Process 1 with Router ID 1.1.1.1
The information displays in the following format:
OSPF packet error statistics:
0: IP: received my own packet 0:OSPF: wrong packet type
0: OSPF: wrong version
0: OSPF: wrong area id
0: OSPF: wrong virtual link
0: OSPF: wrong authentication key0:OSPF: too small packet
display ospf cumulative
Description
Type of input/output OSPF packet.
Number of received packets.
Number of transmitted packets.
Number of all ASE LSAs.
Checksum of ASE LSAs.
Number of originated LSAs.
Number of received LSAs generated by other routers.
Number of all Router LSAs.
Number of all Sumnet LSAs.
Number of all SUMASB LSAs
Number of neighbors in this area.
Number of interfaces in this arera.
Number of SPF computation count in this area.
Number of all LSAs in this area.
Number of intra-area routes.
Number of inter-area routes.
Number of external routes.
process-id
] error
command to view OSPF error information.
0:OSPF: wrong checksum
0:OSPF: area mismatch
0:OSPF: wrong authentication type
Command