Display Debugging; Display Version; System Debug Commands - 3Com 5500G-EI Command Reference Manual

display debugging

display version

System Debug
Commands
Syntax
display debugging [ interface {
} ] [
interface-num
View
All views
Parameter
Specify the Ethernet port name.
interface-name:
Specify the Ethernet port type.
interface-type:
Specify the Ethernet port number.
interface-num:
Specify the module name.
module-name:
Description
Use the
display debugging
Show all the enabled debugging when there is no parameter.
For the related commands, see
Example
Show all the enabled debugging.
<SW5500>display debugging
IP packet debugging switch is on.
Syntax
display version
View
All views
Parameter
None
Description
Use the
display version
the basic hardware configuration information.
Example
Display the information about the system version.
<SW5500>display version
This section describes the system debugging options, and the system diagnostics
information that can be displayed on your Switch 5500G-EI.
interface-name
module-name
]
command to display the enabled debugging process.
.
debugging
command to view the software version, issue date and

System Debug Commands

interface-type
|
447