igmp-snooping
router-aging-time
reset igmp-snooping
statistics
Example
Configure to respond to the IGMP Snooping packet within 20s.
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]igmp-snooping max-response-time 20
Syntax
igmp-snooping router-aging-time
undo igmp-snooping router-aging-time
View
System View
Parameter
Specifies the router port aging time, ranging from 1 to 1000 measured
seconds
:
in seconds. The default is 105.
Description
Use the
igmp-snooping router-aging-time
port aging time of IGMP Snooping.
Use the
undo igmp-snooping router-aging-time
default value.
The port here refers to the Switch port connected to the router. The Layer-2
Ethernet Switch receives general query packets from the router via this port. The
timer should be set to about 2.5 times of the general query period of the router.
Related commands:
igmp-snooping
Example
Set the aging time of the IGMP Snooping router port to 500 seconds.
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]igmp-snooping router-aging-time 500
Syntax
reset igmp-snooping statistics
View
User View
Parameter
None
Description
Use the
reset igmp-snooping statistics
Snooping statistics information.
IGMP Snooping Configuration Commands
seconds
command to configure the router
command to restore the
,
igmp-snooping max-response-time
command to reset the IGMP
241
.