View
FTP Client view
Parameter
Path name.
pathname
:
Description
Use the
command to change the working path on the remote FTP Server.
cd
This command is used to access another directory on FTP Server. Note that the user
can only access the directories authorized by the FTP server.
Example
Change the working path to flash:
[ftp]cd flash:/temp
cdup
Syntax
cdup
View
FTP Client view
Parameter
None
Description
Use the
cdup
This command is used to exit the current directory and return to the upper level
directory.
Example
Change working path to the upper level directory
[ftp]cdup
close
Syntax
close
View
FTP Client view
Parameter
None
Description
Use the
close
exiting FTP client side view so that you terminate the control connection and data
connection with the remote FTP server at the same time.
/temp
command to change working path to the upper level directory.
command to disconnect FTP client side from FTP server side without
FTP Client Commands
423