Mac-Authentication Domain - 3Com 5500G-EI Command Reference Manual

mac-authentication
domain
Centralized MAC Address Authentication Configuration Commands
Description
Use the
mac-authentication
authentication feature on a specified port or globally. Use the
mac-authentication
globally.
By default, the centralized MAC address authentication feature is disabled on each
port and globally.
In System View, if the
interface-list
MAC address authentication feature is enabled globally; if the
parameter is specified, the feature is enabled on the specified interfaces. In the
Ethernet Port View, the
can use the command only to enable the feature on the current interface.
Before or after the enabling of the centralized MAC address authentication, you
can configure related parameters both globally or on the port through their
respective commands. If the parameters are not configured before enabling this
feature, then the parameters will be in their default state when it is enabled.
You must first enable the centralized MAC address authentication globally and
then on the port to make the related configurations on the port effective.
Example
To enable the centralized MAC address authentication feature on port
GigabitEthernet 1/0/1, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]mac-authentication interface GigabitEthernet 1/0/1
To enable the centralized MAC address authentication feature globally, enter the
following:
[SW5500]mac-authentication
Syntax

mac-authentication domain

undo mac-authentication domain
View
System View
Parameter
ISP domain name, character string with no more than 24 characters,
isp-name:
excluding characters like "/", ":", "*", "?", "<", and ">".
Description
Use the
mac-authentication domain
used by the centralized MAC address authentication user. Use the
mac-authentication domain
command to enable the centralized MAC address
command to disable the feature on a specified port or
parameter is not specified, the centralized
parameter cannot be specified, and you
interface-list
isp-name
command to configure the ISP domain
command to return to the default ISP domain.
357
undo
interface-list
undo