Ricoh MP C6502SP System Maintenance page 95

Dust Detect:On/Off
001
Sets DF Dust Detection ON/OFF.
Dust Detect: Lvl
002
Sets DF Dust Detect Level. Easier to Detect as Value increases.
Dust Reject: Lvl
003
Sets ON/OFF and switches level of Vertical stripes correction. 0=OFF, sets level to 1 from
4. Stronger correction as value increases.
Dust Detect Level:Rear
011
DF: Over side. Sets Dust Detection ON/OFF.
Correction Level:Rear
012
DF Over side. Sets Dust Detection level. Easier to detect as value increases.
[LoCPP edge level:K]
4201
Parameter for smaller edge max. threshold.
[0 or 1 / 0 / 1/step]
*ENG 0: OFF
1: ON
[0 to 8 / 4 / 1/step]
*ENG 0: lowest detection level
8: highest detection level
*ENG [0 to 4 / 0 / 1/step]
[0 or 1 / 0 / 1/step]
*ENG 0: OFF
1: ON
[0 to 8 / 4 / 1/step]
*ENG 0:Lowest level
8:Highest level
SP4-XXX (Scanner)
93