Ricoh MP C6502SP System Maintenance page 366

4. Main SP Tables-6
Hinge Open Counter Clear
003
SP6-030-001: Resets the counter for opening and closing of DF hinge part.
[Sub-scanPunchPosAdj:2K/3K FIN]
Adjusts the position for Length (Sub Scan) for Punch.
• Adjustment Value "-": Whole position shifts to the direction of the paper trailing edge
6100
when accepted.
• Adjustment Value "+": Whole position shifts to the direction of the paper leading edge
when accepted.
001 Domestic 2Hole(Europe 2Hole)
002 3-Hole: NA
003 4-Hole: EU
004 5-Hole: SCAN
005 2-Hole: NA
[Main-scanPunchPosAdj:2K/3K FIN]
Adjusts the position for Length (Main Scan) for Punch.
6101
• Adjustment Value "-": Whole position shifts to the front of the machine.
• Adjustment Value "+": Whole position shifts to the rear of the machine.
001 Domestic 2Hole(Europe 2Hole)
002 3-Hole: NA
003 4-Hole: EU
004 5-Hole: SCAN
005 2-Hole: NA
364
[- / - / -]
ENG
[Execute]
*ENG
*ENG
*ENG [-7.5 to 7.5 / 0.0 / 0.1mm/step]
*ENG
*ENG
*ENG
*ENG
*ENG [-2.0 to 2.0 / 0.0 / 0.1mm/step]
*ENG
*ENG