Ricoh MP C6502SP System Maintenance page 336

3. Main SP Tables-5
Server Port Number (Primary)
014
This SP is used for the scan router program.
Server URL Path (Primary)
015
This SP is used for the scan router program.
Server Scheme (Secondary)
016
This SP is used for the scan router program.
Server Port Number (Secondary)
017
This SP is used for the scan router program.
Server URL Path (Secondary)
018
This SP is used for the scan router program.
Rapid Sending Control
022
Enables or disables the prevention function for the continuous data sending error.
5846 [UCS Setting]
Machine ID (for Delivery Server)
Displays the unique device ID in use by the delivery server directory. The value is only
001
displayed and cannot be changed. This ID is created from the NIC MAC or IEEE 1394
EUI. The ID is displayed as either 6-byte or 8-byte binary.
Machine ID Clear(for Delivery
Server)
002
Clears the unique ID of the device used as the name in the file transfer directory. Execute
this SP if the connection of the device to the delivery server is unstable. After clearing the
ID, the ID will be established again automatically by cycling the machine off and on.
Maximum Entries
Changes the maximum number of entries that UCS can handle.
003
If a value smaller than the present value is set, the UCS managed data is cleared, and the
data (excluding user code information) is displayed.
334
*CTL [1 to 65535 / 80 / 1/step]
*CTL [ Up to 16 byte / - / -/step]
*CTL [ Up to 6 char / - / -/step]
*CTL [1 to 65535 / 80 / 1/step]
*CTL [ Up to 16 byte / - / -/step]
[0 or 1 / 1 / -/step]
*CTL 0: Control disabled
1: Control enabled
*CTL [- / - / -]
[- / - / -]
*CTL
[Execute]
*CTL [2000 to 20000 / 2000 / 1/step]