Ricoh MP C6502SP System Maintenance page 724

7. Input and Output Check
Skew Correction
011
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
Scan Entrance Sensor
012
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
Registration Sensor
013
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
Exit Sensor
014
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
Feed Cover Sensor
015
Acquires Sensor information for ADF. Turns to "1" when Cover is opened.
Lift Up Sensor
016
Acquires Sensor information for ADF. Turns to "1" when Lift Up is detected.
Pick-Up Roller HP Sensor
018
Acquires Sensor information for ADF. Turns to "1" when Pick-Up Roller is not in HP.
Bottom Plate HP Sensor
021
Acquires Sensor information for ADF. Turns to "1" when Bottom Plate is not in HP.
Bottom Plate Position Sensor
022
Acquires Sensor information for ADF. Turns to "1" when Pick-Up Roller is not in Feed
Position.
Original Length 4 (LT/A4 Tail
Sensor)
023
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
6123 [INPUT Check: 2K/3K FIN]
Entrance Sensor
001
Acquires Sensor information for the specified sensors. Displays signal level for Sensors as it
is.
722
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]