Ricoh MP C6502SP System Maintenance page 309

RFU Timing
013
Selects the timing for the remote firmware updating.
RCG Error Cause
014
Displays RCG connection error. cause
RCG-C Registed
021
This SP displays the RCG-N installation end flag.
Connect Type (N/M)
023
This SP displays and selects the RCG-N connection method.
Cert Expire Timing
061
Proximity of the expiration of the certification.
Use Proxy
062
This SP setting determines if the proxy server is used when the machine communicates with
the service center.
[0 or 1 / 1 / 1/step]
*CTL 0: Any status of a target machine
1: Sleep or panel off mode only
[0 or 1 / 0 / 1/step]
CTL 0: Initial state, normal condition
1: Error
[0 or 1 / 0 / 1/step]
*CTL 0: Installation not completed
1: Installation completed
[0 or 1 / 0 / 1/step]
*CTL 0: Internet connection
1: Dial-up connection
*CTL [0 to 0xffffffff / 0 / 1/step]
[0 or 1 / 0 / 1/step]
*CTL 0: Not use
1: Use
SP5-722 to 998 (Mode)
307