Ricoh MP C6502SP System Maintenance page 360

3. Main SP Tables-5
001 (0: ON 1: OFF)
5974 [Cherry Server]
001 (0: Light 1: Full)
[Device Setting]
The NIC and USB support features are built into the GW controller. Use this SP to enable
5985
and disable these features. In order to use the NIC and USB functions built into the
controller board, these SP codes must be set to "1".
On Board NIC
Switches Light or Full ver. of the ScanRouter application.
001
When the "Function limitation" is set, "On board NIC" is limited only for the NRS or
LDAP/NT authentication.
• Other network applications than NRS or LDAP/NT authentication are not available
when this SP is set to "2". Even though you can change the initial settings of those
network applications, the settings do not work.
On Board USB
002
Switches Light or Full ver. of the ScanRouter application.
[Mech. Counter]
5987
Mech. Counter
001 0:OFF / 1:ON
358
[0 or 1 / 0 / 1/step]
*CTL 0: ON
1: OFF
*CTL [ - / - / -]
[0 to 2 / 0 / 1/step]
0: Disable
CTL
1: Enable
2: Function limitation
CTL [0 or 1 / 0 / 1/step]
[0 or 1 / 0/ 1/step]
*ENG 0:OFF
1:ON