Ricoh MP C6502SP System Maintenance page 133

F:BE
Displays SSCG Nose Amplitude (F Side/BLUE/EVEN pixel) when adjusting SSCG.
009
Correction value will be decided depending on detected Noise Amplitude when adjusting.
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
F:BO
Displays SSCG Nose Amplitude (F Side/BLUE/ODD pixel) when adjusting SSCG.
010
Correction value will be decided depending on detected Noise Amplitude when adjusting.
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
L:BE
Displays SSCG Nose Amplitude (L Side/BLUE/EVEN pixel) when adjusting SSCG.
011
Correction value will be decided depending on detected Noise Amplitude when adjusting.
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
L:BO
Displays SSCG Nose Amplitude (L Side/BLUE/ODD pixel) when adjusting SSCG.
012
Correction value will be decided depending on detected Noise Amplitude when adjusting.
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
[Scan Adjust Error]
4646
Displays error value of scanning adjustment.
ENG [0 to 1023 / 0 / 1digit/step]
ENG [0 to 1023 / 0 / 1digit/step]
ENG [0 to 1023 / 0 / 1digit/step]
ENG [0 to 1023 / 0 / 1digit/step]
SP4-XXX (Scanner)
131