Ricoh MP C6502SP System Maintenance page 770

7. Input and Output Check
Feed Mtr 3:Feed Speed3:Mid
Speed
018
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
Feed Mtr 3:Feed Speed3:Mid-
Low Speed *D136 only
019
This SP is only for D136 machine. Executing this SP on D135/D137/D138 machines may
cause SC error.
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
Feed Mtr 3:Feed Speed3:Low
Speed
020
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
Feed Mtr 3:Feed Speed2:Std
Speed
021
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
Feed Mtr 3:Feed Speed2:Mid
Speed
022
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
Feed Mtr 3:Feed Speed2:Mid-
Low Speed *D136 only
023
This SP is only for D136 machine. Executing this SP on D135/D137/D138 machines may
cause SC error.
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
Feed Mtr 3:Feed Speed2:Low
Speed
024
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
Feed Mtr 4:Feed Speed4:Std
Speed
025
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
768
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]