Ricoh MP C6502SP System Maintenance page 94

2. Main SP Tables-4
[Set Scale Mask]
Adjusts scanning margins for the leading and trailing edges (sub scan) and right and left
edge (main scan).
4012
• Do not adjust unless the customer desires a scanner margin greater than the printer
margin. These settings are adjusted to erase shadows caused by the gap between the
original and the scale of the scanner unit.
001 Book:Sub LEdge
002 Book:Sub TEdge
003 Book:Main:LEdge
004 Book:Main:TEdge
005 ADF: Leading Edge
007 ADF: Right
008 ADF: left
4013 [Scanner Free Run]
Lamp Off
001
Repeats carriage reciprocating motion with lamp off.
Lamp On
002
Repeats carriage reciprocating motion with lamp on.
4020 [Dust Check]
92
ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
*ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
*ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
*ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
[0 or 1 / 0 / 1/step]
ENG 0:OFF
1:ON
[0 or 1 / 0 / 1/step]
ENG 0:OFF
1:ON