Ricoh MP C6502SP System Maintenance page 325

SettingActive IPv6 Stateless
147
Address 1
SettingActive IPv6 Stateless
149
Address 2
SettingActive IPv6 Stateless
151
Address 3
SettingActive IPv6 Stateless
153
Address 4
SettingActive IPv6 Stateless
155
Address 5
IPv6 Manual Address
156
This SP is the IPv6 manually set address referenced on the Ethernet or wireless LAN (802.11b)
in the format:
"Manual Set Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8 blocks of 16 bits each.
IPv6 Gateway Address
158
This SP is the IPv6 gateway address referenced on the Ethernet or wireless LAN (802.11b).
The IPv6 address consists of a total 128 bits configured in 8 blocks of 16 bits each.
IPv6 Stateless Auto Setting
161
Enables or disables the automatic setting for IPv6 stateless.
[00000000000000000000000000000000
CTL
0000h to
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80h /
CTL
000000000000000000000000000000004
0h / -]
These SPs are the IPv6 status addresses (1 to 5)
CTL
referenced on the Ethernet or wireless LAN
(802.11b) in the format:
CTL
"Status Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits
CTL
configured in 8 blocks of 16 bits each.
[00000000000000000000000000000000
0000h to
*CTL FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80h /
000000000000000000000000000000004
0h / -]
[00000000000000000000000000000000h
to FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFh/
*CTL
00000000000000000000000000000000h
/ -]
[0 or 1 / 1 / 1/step]
*CTL
0: Disable, 1: Enable
SP5-722 to 998 (Mode)
323