Ricoh MP C6502SP System Maintenance page 247

Continuous Door Open
003
Enables/disables initiating a call when the front door remains open.
Jam Detection: Time Length
011
Sets the time a jam must remain before it becomes an "unattended paper jam". This setting
is enabled only when SP5508-004 is set to "1".
Jam Detection: Continuous Count
012
Sets the number of consecutive paper jams required to initiate a call. This setting is enabled
only when SP5508-004 is set to "1".
Door Open: Time Length
013
Sets the length of time the door remains open before the machine initiates a call. This
setting is enabled only when SP5-508-004 is set to "1".
5513 [PartsAlermlevelCount]
Normal
001
Call in at the point that the counter of "PM Parts Counter Display: Normal (SP7-617-001)"
reaches this level (K).
Df
002
Call in at the point that the counter of "PM Parts Counter Display: Df (SP7-617-002)"
reaches this level (K).
5514 [PartsAlermlev]
001 Nomal
Df
002
Sets ON/OFF (Call in or not) of DF paper feed guide.
[SC/Alarm Setting]
5515
With @Remote in use, these SP codes can be set to issue an SC call when an SC error
occurs. If this SP is switched off, the SC call is not issued when an SC error occurs.
[0 or 1 / 1 / 1/step]
*CTL
0: Disable, 1: Enable
*CTL [3 to 30 / 10 / 1min./step]
*CTL [2 to 10 / 5 / 1time/step]
*CTL [3 to 30 / 10 / 1min./step]
*CTL [1 to 9999 / 300 / 1 K]
*CTL [1 to 9999 / 300 / 1 K]
*CTL [0 or 1 / 1/ 1 /step]
*CTL [0 or 1 / 0/ 1 /step]
SP5-009 to 721 (Mode)
245