Ricoh MP C6502SP System Maintenance page 631

[S:LSize Scan PGS]
These SPs count the total number of large pages input with the scanner for scan jobs only.
8205
Large size paper (A3/DLT) scanned for fax transmission are not counted.
Note: These counters are displayed in the SMC Report, and in the User Tools display.
8211 [T:Scan PGS/LS]
8212 [C:Scan PGS/LS]
8213 [F:Scan PGS/LS]
8215 [S:Scan PGS/LS]
8216 [L:Scan PGS/LS]
• Reading user stamp data is not counted.
• If a job is cancelled, the pages output as far as the cancellation are counted.
• If the scanner application scans and stores 3 B5 sheets and 1 A4 sheet, the S: count is 4.
• If pages are copied but not stored on the document server, these counters do not change.
• If both sides of 3 A4 sheets are copied and stored to the document server, the C: count is 6 and the
L: count is 6.
• If you enter document server mode then scan 6 pages, the L: count is 6.
[ADF Org Feeds]
8221
These SPs count the number of pages fed through the ADF for front and back side
scanning.
Front
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front side count is the same as
001
the number of pages fed for either simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front side count is the same
as the number of pages fed for duplex front side scanning. (The front side is determined
by which side the user loads face up.)
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL These SPs count the number of pages
scanned into the document server.
*CTL
[0 to 9999999 / 0 / 1]
The L: counter counts the number of pages
*CTL
stored from within the document server mode
*CTL
screen at the operation panel, and with the
Store File button from within the Copy mode
*CTL
screen
*CTL [0 to 9999999 / 0 / 1 / step]
SP8-XXX (Data Log 2)
629