Security Of The Operation Log - Ricoh MP C6502SP System Maintenance

13. Capturing Log to SD card
Type
Operation
panel debug
log
• Debug logs are not saved in the following conditions.
• While erasing all memory
• While data encryption equipment is installed
• While changing the firmware configuration
• Forced power OFF (accidentally disconnecting the outlet)
• Engine debug log in shutdown
• When the power supply to the HDD is off because of energy saving (engine OFF mode /STR
mode)

Security of the Operation Log

The following operation logs related to security are not saved.
• User ID
• Password
• IP address
• Telephone number
• Encryption key
• Transition to SP mode
Also the following operation logs are not saved.
• Number keys (0 to 9) on the operation panel
• Soft keyboard on the touch panel display
• External keyboard
864
Storage Timing
• When a controller SC occurs
• When saving by manual operation
with the Number keys and the Reset
key (Press "Reset", "0", "1" and "C"
(hold for 3 seconds))
• When the operation unit detects an
error
• When the operation panel detects an
error
Destination (maximum storage
capacity)
Operation panel (400 MB /Up to
30 times)
When updating the firmware for the
operation panel, the debug logs are
erased.