Ricoh MP C6502SP System Maintenance page 823

-
001
Sets Scanner FlairAPI Function enable / disable.
This SP is set by BitSwitch and needs to reboot the machine after making changes.
bit Setting
bit 0 Start of FlairAPI Server
Access permission of
bit 1 FlairAPI from outside of
the machine
bit 2 Reserved
bit 3 Reserved
bit 4 Simple UI Function
Accessing permission of
bit 5 Simple UI from outside of
the machine
bit 6 Reserved
bit 7 Reserved
*CTL * see BitSwitch below:
meanings
0 1
Off
On
(Do not
(Start)
Start)
Disabled Enabled
- -
- -
Disabled Enabled
Disabled Enabled
- -
- -
Description
Sets whether to start exclusive
FlairAPI http server. If it is 0,
scanning FlairAPI function and
simple UI function will be
disabled. The machine installed
Android operating panel option,
set "1", others set "0".
If it is "0", accessing is limited
from the machine only, such as
operating panel, SDK/J, MFP
browsers etc... If it is "1",
accessing is allowed from
outside of FlairAPI such as PC,
Remote UI, IT-Box etc...
-
-
If it is "1", the machine can be
used Scanner Simple UI. If it is
"0", requesting URL of Simple UI
returns "404 Not Found"
If it is "0", accessing is limited
from the machine only
(operating panel and MFP
browser). If it is "1", accessing is
allowed from outside of Simple
UI such as PC, mobile devices,
and so on.
-
-
SP1-XXX
821