Ricoh MP C6502SP System Maintenance page 637

004 200dpi to 399dpi
005 < 199dpi
• Copy resolution settings are fixed so they are not counted.
• The Fax application does not allow finely-adjusted resolution settings so no count is done for the
Fax application.
8381 [T:Total PrtPGS]
8382 [C:Total PrtPGS]
8383 [F:Total PrtPGS]
8384 [P:Total PrtPGS]
8385 [S:Total PrtPGS]
8386 [L:Total PrtPGS]
8387 [O:Total PrtPGS]
• When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is counted
as 2.
• When several documents are merged for a print job, the number of pages stored are counted for
the application that stored them.
• These counters are used primarily to calculate charges on use of the machine, so the following
pages are not counted as printed pages:
- Blank pages in a duplex printing job.
- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports, etc.)
- Test prints for machine image adjustment.
- Error notification reports.
- Partially printed pages as the result of a copier jam.
LSize PrtPGS
These SPs count pages printed on paper sizes A3/DLT and larger.
8391
Note: In addition to being displayed in the SMC Report, these counters are also
displayed in the User Tools display on the copy machine.
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL
*CTL
These SPs count the number of pages printed
*CTL
by the customer. The counter for the
application used for storing the pages
*CTL
increments.
*CTL
[0 to 99999999 / 0 / 1 / step]
*CTL
*CTL
*CTL [0 to 99999999 / 0 / 1 / step]
SP8-XXX (Data Log 2)
635