Ricoh MP C6502SP System Maintenance page 324

3. Main SP Tables-5
Protocol usage
Shows which protocols have been used with the network.
0: Off (Not used the network with the protocol.)
1: On (Used the network with the protocol once or more.)
bit0: IPsec, bit1: IPv6, bit2: IEEE 802. 1X, bit3:Wireless LAN,
bit4: Security mode level setting, bit5:Appletalk, bit6: DHCP,
bit7: DHCPv6, bit8: telnet, bit9: SSL, bit10: HTTPS,
087
bit11: BMLinkS printing, bit12: diprint printing, bit13: LPR printing,
bit14: ftp printing, bit15: rsh printing, bit16: SMB printing,
bit17: WSD-Printer, bit18: WSD-Scanner, bit19: Scan to SMB,
bit20: Scan to NCP, bit21: Reserve, bit22: Bluetooth,
bit23: IEEE 1284, bit24: USB printing, bit25: Dynamic DNS,
bit26: Netware printing, bit27: LLTD, bit28: IPP printing,
bit29: IPP printing (SSL), bit30: ssh, bit31: sftp
TELNET (0: OFF 1: ON)
090
Enables or disables the Telnet protocol.
Web (0: OFF 1: ON)
091
Enables or disables the Web operation.
Active IPv6 Link Local Address
145
This is the IPv6 local address link referenced on the Ethernet or wireless LAN (802.11b) in the
format:
"Link Local Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8 blocks of 16 bits each.
322
*CTL [0 or 1 / 0x00000000 / 1bit/step]
[0 or 1 / 1 / 1/step]
*CTL 0: Disable
1: Enable
[0 or 1 / 1 / 1/step]
*CTL
0: Disable, 1: Enable
[00000000000000000000000000000000
0000h to
CTL FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80h /
000000000000000000000000000000004
0h / -]