Ricoh MP C6502SP System Maintenance page 228

3. Main SP Tables-5
[TCRU: Set Machine]
• TCRU: Set Machine
5185
• TCRU becomes intended when "On" is selected and Replacement Banner Display etc.
switch.
001 -
[RK4]
Enables or disables the prevention for RK4 (accounting device) disconnection.
5186
If the RK4 is disconnected for 10 seconds when this SP is set to "1 (Enable)", the machine
automatically jams a sheet of paper.
001 -
[Copy Nv Version]
5188
Displays the version number of the NVRAM on the controller board.
001 -
[Mode Set]
5191
Shifts to the power save mode or not.
001 Power Str Set
[External Controller Info. Settings]
5193
External controler settings.
226
[0 or 1 / 0 / 1/step]
*ENG 0:OFF
1:ON
[0 or 1 / 0 / 1/step]
*ENG 0: Disable
1: Enable
*CTL [- / - / - ]
[0 or 1 / 1 / 1/step]
*CTL 0: OFF
1: ON