Ricoh MP C6502SP System Maintenance page 338

3. Main SP Tables-5
Fill Addr Acl Info
This SP must be executed immediately after installation of an HDD unit in a basic machine
that previously had no HDD. The first time the machine is powered on with the new HDD
installed, the system automatically takes the address book from the NVRAM and writes it
onto the new HDD. However, the new address book on the HDD can be accessed only by
the system administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
Procedure
041
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically.
5. However, at this point the address book can be accessed by only the system
administrator or key operator.
6. Enter the SP mode and do SP5846-041. After this SP executes successfully, any user
can access the address book.
Addr Book Media
043
Displays the slot number where an address book data is in.
046 Initialize All Setting & Addr Book
Initialize Local Address Book
047
Clears the local address book information, including the user code.
336
[- / - / -]
*CTL
[Execute]
[0 to 30 / 0 /1/step]
0: Unconfirmed
1: SD Slot 1
2: SD Slot 2
*CTL 3: SD Slot 3
4: USB Flash ROM
10: SD Slot 10
20: HDD
30: Nothing
[- / - / -]
CTL
[Execute]
[- / - / -]
CTL
[Execute]