Ricoh MP C6502SP System Maintenance page 188

2. Main SP Tables-4
Set Std Chart
004
Re-write scan settings (front side current value) of normal chart.
Chromaticity Rank
Correct dispersion of scanner reading value among same models, based on the Color
005
degree rank setting value of Scanner (front side).
(Setting value0: Correction OFF)
4958 [Read/Restore Std: Rear]
Read New Chart
001
Sets scan settings (Reverse side current value) of normal chart by run scanning.
Recall Prev Chart
002
Unset scan settings (Reverse side current value) of normal chart.
Set Std Chart
004
Re-write scan settings (Reverse side current value) of normal chart.
Chromaticity Rank
Correct scattered scanning value among same models based on Color degree rank setting
005
value of Scanner (Reverse side).
(Setting value0: Correction OFF)
4993 [High Light Correction]
Sensitivity Selection
001
Sets detect sensitivity for full color auto density. Larger the value, weaker (less background
tracking) the sensitivity.
Range Selection
002
Sets detect area for full color auto density. Larger the value, wider the area.
186
ENG [0 or 1 / 0 / 1/step]
*ENG [0 to 255 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
*ENG [0 to 255 / 0 / 1/step]
[0 to 9 / 4 / 1/step]
*ENG 0: Weak
9: Strong
[0 to 9 / 4 / 1/step]
*ENG 0: Weak
9: Strong