Ricoh MP C6502SP System Maintenance page 40

1. Main SP Tables-3
Corr(Mid):FC
014
Sets Correction Coefficient (Mid) for Page Interval for Job End ProCon (FC).
3539 [Dev Agitating Time :Set]
Time
001
Sets Developer Agitating Time.
ON/OFF(by AbsHum)
010
Sets ON/OFF for Absolute Humidity Correction for Developer Agitating Time.
ON/OFF(by Non-use Time)
030
Sets ON/OFF for Absolute Humidity Correction for Developer Agitating Time.
ON/OFF(by Non-use Time)
050
Sets ON/OFF for Absolute Humidity Correction for Image Coverage Correction.
3554 [Set Expel Dev Mode]
Set Expel Dev Mode
001
Sets Execute/Not Execute for Expel Development Mode.
Execution Threshold Value:Run
002
Sets Time Threshold for Expel Operation Execution when printing is finished.
Execution Threshold Value:End
003
Sets Time Threshold for Expel Operation Execution when printing.
Calculated Value:Half-Speed
004
Coefficient Setting for Expel Time added by Tone Fill Execution for Half-Speed.
Required Expel Time:K
011
Displays Required Expel Time:K.
38
*ENG [0.00 to 1.00 / 1.00 / 0.01/step]
*ENG [0 to 3000 / 0 / 1sec/step]
*ENG [0 to 1 / 1 / 1/step]
*ENG [0 to 1 / 1 / 1/step]
*ENG [0 to 1 / 1 / 1/step]
ENG [0 to 1 / 1 / 1/step]
ENG [0 to 255 / 0 / 1sec/step]
ENG [0 to 255 / 15 / 1sec/step]
[0.00 to 655.35 / 0.67 / 0.01sec/
ENG
step]
[0.00 to 655.35 / 0.00 / 0.01sec/
ENG
step]