Ricoh MP C6502SP System Maintenance page 632

6. Main SP Tables-8
Back
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count is the same as the
002
number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is the same as
the number of pages fed for duplex rear-side scanning.
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also,
the pages are not counted if the jam occurs before the first sheet is output.
[Scan PGS/Mode]
8231
These SPs count the number of pages scanned by each ADF mode to determine the work
load on the ADF.
Large Volume
001
Selectable. Large copy jobs that cannot be loaded in the ADF at one time.
SADF
002
Selectable. Feeding pages one by one through the ADF.
Mixed Size
003
Selectable. Select "Mixed Sizes" on the operation panel.
Custom Size
004
Selectable. Originals of non-standard size.
Platen
005
Book mode. Raising the ADF and placing the original directly on the platen.
Mixed 1side/ 2side
006
Simplex and Duplex mode.
• If the scan mode is changed during the job, for example, if the user switches from ADF to Platen
mode, the count is done for the last selected mode.
• The user cannot select mixed sizes or non-standard sizes with the fax application so if the original's
page sizes are mixed or non-standard, these are not counted.
630
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]