Ricoh MP C6502SP System Maintenance page 226

3. Main SP Tables-5
001 -
[Paper Size Type Selection]
5131
The program selects a paper size system from the following alternatives: the AB system (0),
the LT system (1), and the AF system (2).
001 -
[Bypass Length Setting]
Determines whether the transfer sheet from the by-pass tray is used or not.
5150
Normally the paper length for sub scanning paper from the by-pass tray is limited to 600
mm, but this can be extended with this SP to 1260 mm.
001 0: OFF 1: ON
[App. Switch Method]
5162
Determines whether the application screen is switched with a hardware switch or software
switch.
001 -
[Z-fold Position]
5165
Determines whether the application screen is switched with a hardware switch or software
switch.
001 A3T
002 B4T
003 A4T
224
*CTL [- / 0 / -]
[0 to 2 / 2 / 1/step]
0: DOM(Japan)
*ENG
1: NA
2: EU
[0 or 1 / 0 / 1/step]
CTL 0: OFF
1: ON
[0 or 1 / 0 / 1/step]
*CTL 0: Soft Key Set
1: Hard Key Set
- [2.0 to 25.0 / 2.0 / 0.1mm/step]
- [2.0 to 25.0 / 2.0 / 0.1mm/step]
- [2.0 to 25.0 / 2.0 / 0.1mm/step]