Ricoh MP C6502SP System Maintenance page 364

4. Main SP Tables-6
T-Edge Erase (1-Pass): Front
Executes Front T-Edge Regist Adjustment.
• Value increase: Increases Image T-Edge.
014
• Value decrease: Delete Image T-Edge.
Corrects it into the maximum value within adjustable range if the value which exceeds the
range is set. The previous setting value remains if setting is finished without fixing it. Sets the
initial value for -1.5mm instead of 0mm considering Original.
T-Edge Erase (1-Pass): Rear
Executes Rear T-Edge Regist Adjustment.
• Value increase: Increases Image T-Edge.
015
• Value decrease: Delete Image T-Edge.
Corrects it into the maximum value within adjustable range if the value which exceeds the
range is set. The previous setting value remains if setting is finished without fixing it. Sets the
initial value for -1.5mm instead of 0mm considering Original.
6009 [ADF FreeRun]
Free Run Simplex Motion
001
Free Run Simplex Motion starts when an original is set in ADF.
Free Run Duplex Motion
002
Free Run Duplex Motion starts when an original is set in ADF.
Free Run Stamp Motion
003
Free Run Stamp Motion starts when an original is set in ADF.
[Stamp Position Adj.]
Adjusts Stamp Position.
6010
• Value increase: Shifts Stamp Position to the side of Original Trailing Edge.
• Value decrease: Shifts Stamp Position to the side of Original Leading Edge.
001 -
362
*ENG [-5.0 to 5.0 / -1.5 / 0.1 mm/step]
*ENG [-5.0 to 5.0 / -1.5 / 0.1 mm/step]
[- / - / -]
ENG
[Execute]
[- / - / -]
ENG
[Execute]
[- / - / -]
ENG
[Execute]
*ENG [-5.0 to 5.0 / 0.0 / 0.1 mm/step]