Ricoh MP C6502SP System Maintenance page 335

Delivery Server Model
009
Allows changing the model of the delivery server registered by the I/O device.
Delivery Svr. Capability
Changes the capability of the registered that the I/O device registered.
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
010
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to "0")
Delivery Svr Capability (Ext)
Changes the capability of the registered that the I/O device registered.
Because SP5845-010 is full, set aside an area for future additional capabilities.
Bit7 = 1: Not used
Bit6 = 1: Not used
011
Bit5 = 1: Not used
Bit4 = 1: Not used
Bit3 = 1: Not used
Bit2 = 1: Not used
Bit1 = 1: Not used
Bit0 = 1: Not used
Server Scheme (Primary)
013
This SP is used for the scan router program.
[0 to 4/ 0 / 1/step]
0: Unknown
1: SG1 Provided
*CTL
2: SG1 Package
3: SG2 Provided
4: SG2 Package
*CTL [0 to 255 / 0 / 1 /step]
*CTL [0 to 255 / - / x2/step]
*CTL [ Up to 6 char / - / -/step]
SP5-722 to 998 (Mode)
333