Ricoh MP C6502SP System Maintenance page 308

3. Main SP Tables-5
Function Flag
003
Enables or disables the remote service function.
004 Commnication Test Call
005 Device Information Call
SSL Disable
007
Controls if RCG (Remote Communication Gate) confirmation is done by SSL during an
RCG send for the @Remote over a network interface.
RCG Connect Timeout
008
Sets the length of time (seconds) for the time-out when the RCG (Remote Communication
Gate) connects during a call via the @Remote network.
RCG Write Timeout
009
Sets the length of time (seconds) for the time-out when sent data is written to the RCG
during a call over the @Remote network.
RCG Read Timeout
010
Sets the length of time (seconds) for the timeout when sent data is written from the RCG
during a call over the @Remote network.
Port 80 Enable
011
Controls if permission is given to get access to the SOAP method over Port 80 on the
@Remote network.
@Remote Commnuication
012
Rermission Setting
306
[0 or 1 / 0 / 1/step]
*CTL
0: Disabled, 1: Enabled
[- / - / -]
CTL
[Execute]
[- / - / -]
CTL
[Execute]
[0 or 1 / 0 / 1/step]
*CTL 0: No. SSL used.
1: Yes. SSL not used.
*CTL [1 to 90 / 30 / 1second/step]
*CTL [0 to 100 / 60 / 1second/step]
*CTL [0 to 100 / 60 / 1second/step]
[0 or 1 / 0 / 1/step]
*CTL 0: No. Access denied
1: Yes. Access granted.
[0 to 2 / 1 / 1/step]
0: Disabled
*CTL
1: Enabled
2: Limited