Removing And Installing Airbag Control Unit -J234; Removing And Installing The Front Passenger Airbag Switch - Skoda FABIA 2000 Workshop Manual

69
WARNING!
Nobody should be in the vehicle when the battery
is being connected.
Removing and installing airbag control
unit -J234-
1 - 8 Nm
2 - control units plug
3 - control unit
Note
After connecting the battery earth strap, a few additional
operations are necessary ⇒ Electrical System;
Rep. Gr. 27.
Removing:
–
Disconnect earth strap of the battery.
–
Remove right footwell covering on driver's side.
Removing centre console at front ⇒ Chapter 68-2.
–
–
If necessary, cut the carpet and insulation mattings
around the control unit.
–
Unlock the connector lock -2- and remove the connec-
tor.
–
Release nuts -1-.
–
Remove control unit -3-.
Installing:
–
Installation is carried out in the reverse order.
WARNING!
Nobody should be in the vehicle when the battery
is being connected.
Note
When replacing the control unit repeat coding ⇒ Chapter
01-5.
Removing and installing the front pas-
senger airbag switch
WARNING!
Safety measures should be observed when han-
dling airbag units ⇒ 69-3 page 1.
69-3
10
page
Airbag
FABIA 2000 Body Work
Edition 10.03
S00.5319.13.20