Raytheon Pathfinder ECDIS Operator's Manual page 77

Procedure: (see Figure: 4−2)
Step 1 Select Charts (menu bar)
Step 2 Select Info / Select... The Dialog Box appears
Step 3 Select S57 + CM93/3
Step 4 Point and click on the different chart types (i.e., Harbor, Coastal, etc.).
Step 5 Point and click on the chart you wish to view (inside the hatched box).
You may receive a message which states "Please center on a region
covered by this chart." In this case, click on "OK," then point and click the
cursor on an area of the chart you wish to view.
Step 6 Click on View to view the chart and leave the dialog box open or
If the chart you selected does not cover 80 % of the display at the charts
designated scale, the program will override your choice and display a
more appropriate chart. You may override this by zooming in the display
until your chart is displayed.
Edition: 30.MAR.2007
Operator Manual
In order to see all of your charts, you may need to first click on the World
Chart and click "View." Red boxes with hatch marks appears in the
display, and on top of the chart to indicate chart coverage with C−MAP
charts. Official S57 ENCs are marked in green.
You may need to zoom−in, in order to see the individual charts.
Click on View and Close to view the chart and close the dialog box
ECDIS
NOTE
NOTE
4−5
R
Raytheon Anschütz GmbH
Germany
3655DOC020102