Raytheon Pathfinder ECDIS Operator's Manual page 225

7.1.10 Man Overboard
When the Man Overboard command is selected, ECDIS posts an entry to the
Event Log. You may sound the alarm immediately by clicking on Alarm (a sec-
ond MOB entry and Alarm entry will be posted to the Event Log). If the Alarm is
signaled, ECDIS disconnects the autopilot, and places a ship mark on the
display.
The Man Overboard All Clear command turns off the general alarm and posts a
"man overboard cleared" entry in the Event Log.
Procedure: (see Figure: 7−14)
Step 1 Select the ship menu (see Figure: 7−1).
Step 2 Select the MOB button or select Guard Zone....
Edition: 30.MAR.2007
ECDIS
Operator Manual
ECDIS places special MOB marker with time entry on the
chart, set an Alarm (acoustic and visual in the message display area).
Following MOB information displays in the status bar:
Position of the MOB, distance and bearing to the MOB
7−19
R
Raytheon Anschütz GmbH
Germany
3655DOC020102