Raytheon Pathfinder ECDIS Operator's Manual page 37

2.2 MENU BAR
The ECDIS is a menu−driven program. To tell the ECDIS what to do, simply
select a command from one of the ECDIS's ten menus. The command name
describes the function the ECDIS performs when you select it.
Commands are accessed by the Menu Bar via cursor or if available via keyboard
commands.
Via cursor
Each function is available by clicking on the Menu Command and using the
pull−down menus.
Via keyboard
Each Menu Command contains a letter that is underlined, i.e. Display.
Simultaneously pressing the Keyboard Command, Alt and the underlined letter
invokes the function, i.e.. Pressing Alt and the letter D on the Keyboard invokes
the Display menu.
Simultaneously pressing the Alt and the letter D followed by the letter N on the
Keyboard the display color changes to the night color mode.
Short Information, see Annex − 2 ECDIS First Menu Levels.
2.2.1 Pulldown Menu
Select a menu name from the menu bar (e.g. Charts) per cursor or per
keystrokes.
The following pulldown menu, see Figure: 1−6, appears.
Select the desired function.
• The active pulldown menu functions are colored in black.
• The passive pulldown menu functions are colored in gray.
This passive function depends of:
− actual ECDIS function (e.g. Zoom in/out)
− optionally Program tool
− ECDIS system, connected with an Digitizing Table or Autopilot System
Edition: 30.MAR.2007
ECDIS
Operator Manual
2−7
R
Raytheon Anschütz GmbH
Germany
3655DOC020102