Procedure: (see Figure: 12−12)
Step 1 Select Autopilot. from the Integration menu.
Step 2 Click inside the turning response text box and enter the number of
Step 3 Click inside the Rate of Turn text box and enter a rate of turn.
Step 4 If you want ECDIS to automatically advance the
Step 5 Click on OK. A message box appears explaining that you need to set
Edition: 30.MAR.2007
ECDIS
Operator Manual
The Dialog box appears.
ship lengths you wish your autopilot to begin turning prior to reaching
the wheel overpoint position.
autopilot to the next waypoint, click in the Auto advance to next
Waypoint check box (when Raytheon Anschütz Autopilots used).
the rate of turn in your autopilot.
Figure: 12−12 Autopilot dialog box
12−19
R
Raytheon Anschütz GmbH
Germany
3655DOC020102