Raytheon Pathfinder ECDIS Operator's Manual page 255

8.2.3 Toggle Routes
The menu function Toggle Routes allows quick switching between a primary and
a secondary route.
For this action, both routes must be defined within the same part of the sea
chart.
Procedure: (see Figure: 1−19)
Step 1 Select Open Route from the Routes menu..
Step 2 For further Secondary Route information place the Cursor on a
The List Route dialog box appears confirming average ship's speed.
ECDIS automatically calculates this for you, but you may enter a
different speed if you wish to.
Edition: 30.MAR.2007
ECDIS
Operator Manual
Select Toggle Routes. Route priority changes at once.
The Primary Route is shown in red thick dashed line
The Secondary Route is shown in red thin dashed lines.
Figure: 1−19 Toggle Routes
waypoint and click the [Query] button.
Select List Secondary Route ....
The following dialog appears
8−27
Step 2
NOTE
R
Raytheon Anschütz GmbH
Germany
3655DOC020102