Raytheon Pathfinder ECDIS Operator's Manual page 320

12 INTEGRATION MENU
12.1 INTEGRATION MENU COMMANDS
use the pull down menu
Integration
Commands
12.1.1 Nav Device
Selection...
12.1.2 Position
Monitoring...
12.1.3 AIS Options...
12.1.4 Integrating an
ARPA Radar..
12.1.4.1Radar Overlay
Settings...
12.1.5 Autopilot...
Edition: 30.MAR.2007
Operator Manual
via cursor
via keystroke
I
Alt
+
Figure: 12−1 Integration Menu
Allows to select from available position sensors.
Allows to monitor the ship position (Deviation Limit) and the position
devices (e.g. GPS).
Option
Allows to select the specific Target information, displaying at the
chart.
Turns on or off the tracking of acquired targets from an ARPA radar;
turns on and off the display of target heading vectors. If you do not
have a radar integrated, this menu command will be grayed (not avail-
able).
Option
Allows the user to display the real Radar PPI as an overlay on the
ECDIS display. The radar overlay settings allows the user to find the
individual radar overlay quality.
Allows the user to turn on or off the transmission of data to the autopi-
lot as well as to specify a rate of turn, and the turning response.
ECDIS
Logs Integration
Nav Device Selection...
Position Monitoring...
AIS Options...
ARPA Radar Tracking...
or
Radar Overlay Settings...
Autopilot...
Echosounder...
Wind Sensor...
Nav Interface...
Ship Info
Set Date and Time...
Function
12−1
R
Raytheon Anschütz GmbH
Germany
Help
3655DOC020102