10.1.4
Import Object Groups
The Import Object Groups command allow you to import objects from a floppy
disk .You can only import objects which have been exported by the ECDIS
software from Raytheon Anschütz.
Procedure: (see Figure: 10−5)
Step 1 Select Import Object Group from the Plot Layer menu.
Step 2 Insert a Floppy into the drive and click on the Import to Floppy button.
Step 3 Click on Close when you are done.
Edition: 30.MAR.2007
ECDIS
Operator Manual
The dialog box appears displaying the names of all the object groups
saved in the list.
The dialog box remains open for you to import additional objects.
Select a name of the object you want to import
Step 2
Figure: 10−5 Import object dialog box
10−7
R
Raytheon Anschütz GmbH
Germany
.
Step 3
3655DOC020102