Raytheon Pathfinder ECDIS Operator's Manual page 246

(4)
Use the Delete feature of the Edit Route command to remove waypoints from a
route. If you delete the active waypoint, ECDIS draws a course line between the
previous and next waypoints in the route.
Step 4.1 Using the target cursor
Step 4.2 Select the OK button, if the a route changing is finished.
Step 4.3 To save the route using the same name, click on OK. If you want to
(5)
If you are using the Track Control command and you begin to make changes to
a route (the Edit Route dialog box is opened), ECDIS automatically switches to
manual steering. Once you have made the changes, you must reactivate track
control (see chapter 8.2.1.6). The Edit Route command offers a very helpful
feature that allows you to reverse the order of waypoints in a route. Use this
feature when you want to make a return trip following the same route.
Step 5.1 Click on Accept. The order of the waypoints in the list box is reversed.
Step 5.2 Select the OK button, if the a route changing is finished.
Step 5.3 To save the route using the same name, click on OK. If you want to
3655DOC020102
Operator Manual
Option button Route: Delete selected
Position the cursor over the waypoint you want to delete and click on
Enter.
or Using the waypoint list in the dialog box.
Click on the waypoint you want to delete. Then click on Accept.
The Save Route dialogue box appears displaying the name of the
route.
save the route using a new name of up to 25 characters, then click on
OK. If you do not want to save your changes, click on Cancel.
Option button Route: Reverse selected
The Save Route dialogue box.
save the route using a new name of up to 25 characters, then click on
OK. If you do not want to save your changes, click on Cancel.
8−18
Edition: 30.MAR.2007