MAIN MENU (chapter 3)
select and configure a printer
•
print the image
•
ends the ECDIS session
•
CHARTS MENU (chapter 4)
select and view the different charts you have available
•
for the world or the currently displayed region
Init the digitizer functions, route planning and drawing
•
objects (option).
license administration
•
installation (CM93/3,IHO S63,ARCS,DNC)
•
updates (CM93/3,S57,ARCS,DNC)
•
take over the "Chart Server Rights" (option)
•
OPTIONS MENU ARCS (chapter 5.1)
actual chart information (Chart Name, Paper Chart
•
Issued..)
shows the Chart Legend
•
shows special Marine or Warning messages
•
shows the Update History
•
shows updated chart zones highlighted by red lines
•
(square)
OPTIONS MENU S57 (chapter 5.2)
select Presentation Libraries for S57
•
add or delete chart symbols, points, line and text
•
add or delete chart data to or from a chart according to
•
S57, Collars and Symbols
shows the Chart Legend
•
shows the Update History
•
select different display modes (Base--,Standard--,
•
Full--,User--Display)
set the CM93/3 chart scale mechanism (automatic size,
•
defined size)
change symbol type from simplified to traditional
•
symbols
OPTIONS MENU DNC (chapter 5.3)
add or delete chart symbols, points, lines and text
•
add or delete chart data to or from a chart according to
•
DNC, Collars and Symbols
shows the update history
•
select different display modes
•
(Base--,Standard--,Full--,User--Display)
change symbol type from simplified to traditional
•
symbols
DISPLAY MENU (chapter 6)
Zoom In or Zoom out
•
changes the scale of the display (default, largest,
•
specified and center)
saves, opens and deletes area views pre--defined by the
•
user
keeping your ship in the display area (ship center)
•
own ship symbol will be displayed on scale as
•
silhouette
changes display colors
•
toolbar On or Off
•
Status Bar On or Off.Information Panel On or Off and
•
panel selection e.g. NAV or TRACK
SHIP MENU (chapter 7)
specifies the ship's dimensions and navigation device
•
antennas
determines which devices are dedicated to which ports
•
allows to monitor the selected position device against
•
a secondary position
simulates ship movement manual speed and bearing
•
values
corrects the ship's position based on an ARPA target
•
with a known position
turn On or Off course vector, heading vector or anti--
•
grounding searchlight
place a ship mark with a time level at the ship's position
•
monitor the drift while anchored
•
place an alarm zone around own ship to monitor in--
•
truding ARPA targets at defined distance
turn off the autopilot, places a mark at ship's location
•
MOB
clear the man overboard alarm and posts an "All Clear"
•
entry to Event Log
ROUTES MENU (chapter 8)
route information about symbols, server or client rights
•
create or edit a primary or secondary route
•
open a saved primary or secondary route
•
toggle primary and secondary route
•
names and saves a route to the route list
•
center the display on the active waypoint of the open route
•
shows the waypoint list of the route
•
clears the open route from the display
•
deletes saved route
•
exports saved routes to floppy
•
deletes saved route
•
exports/imports to or from a floppy
•
sends and displays route information to radar
•
start/stop route monitoring or track control
•
calculates and shows Distance--To--Run symbol posi--
•
tions on the route. Shows time for planned position
allows the user to write a checklist (leaving the harbor,
•
changing a route
changes WOP alarm settings
•
checks a route passing a restricted area
•
route server rights
•
NAV TOOLS (chapter 9)
for drawing an electronic bearing line and variable
•
range marker
for rhumb line, great circle line calculation
•
for calculating position values for different datums
•
for calculating the cursor position for differnt datums
•
set/delete position fix marker
•
to determine ship's location in Dead Reckoning mode
•
to calculate the arrival time depending on the speed
•
to calculate the tidal predictions
•
to actuate the magnet variation
•
PLOT LAYER COMMAND (chapter 10)
drawing tool
•
merges two or more object groups
•
Export/Import object groups
•
LOGS MENU (chapter 11)
shows log of previous 12 hours
•
shows log current 12 hours
•
show, hide or delete recorded trails
•
INTEGRATION MENU (chapter 12)
select a deviation limit value for heading or track control
•
showing the available position sensors
•
display the radar PPI as an overlay on the ECDIS
•
to turn On or Off the data transmission to the autopilot
•
enter an deth alarm for an itegrated echosounder
•
(if an echosounder is available)
to specify whether and wind information displayed
•
relative to own ship or as true wind speed and
direction
determines which devices are dedicated to which ports
•
to specify the ship's dimensions; specifies location of
•
navigation device antennas relative to bow and port side
the ECDIS system clock is set to UTC
•
ECDIS
SHORT OPERATION
Menu Bar
Chart Area
Status Bar
see chapter 2.9
see chapter 2.8
Tool Bar
Previous/
Center On
Fixed
Toggle
Next
Zoom In/
Ship
Free
EBL
Mark At
ARCS/S57 Select
Out
EBL
Ship
Cursor Symbols
Operator Control
Starting the ECDIS
Chart Area
see chapter 2.1.1
Target
Menus / Dialogs
Digitizer Puck
Trackball
Display Scroll down
see chapter 2.1.3
Display Scroll left
Display Scroll right
Display Scroll up
Zoom In
Operator Panel
see chapter.2.1.4
Vertical bar
Change the window size
Radar Cursor (A,B,C..)
A
*) Option
Edition: 30.MAR.2007
R
Raytheon Anschütz GmbH
Germany
Information Panel
see chapter 2.7
MOB
Radar
Standard
Overlay
Chart
Display
*)
3655DOC0201