12.1.10
Set Date and Time
The Set Date and Time command allows you to set the date and time for your
computer (Local Time on the Information Panel).
Procedure: (see Figure: 12−19)
Step 1 Select Set Date and Time from the Integration menu.
Step 2 Enter or change the UTC Date and UTC Time values.
Step 3 Click on the OK button
Edition: 30.MAR.2007
Operator Manual
The Date/Time Properties dialog box appears.
Figure: 12−19
Date and Time Properties dialog box
ECDIS
12−25
R
Raytheon Anschütz GmbH
Germany
3655DOC020102