Raytheon Pathfinder ECDIS Operator's Manual page 55

2.4 TOOL BAR
The toolbar, Figure: 1−24, (below) provides quick access to many ECDIS's
commands.
1)
2)
3)
4)
5)
6)
7)
8)
Edition: 30.MAR.2007
Operator Manual
1 2 3 4
Figure: 1−24
Previous View − Retrieves the view which was displayed prior to the current
view. ECDIS is capable of remembering up to 30 views.
Next View − Opens the view which was displayed after the current view.
ECDIS is capable of remembering up to 30 views.
Zoom In − Zooms in the display, keeping the same "center" location.
Please see " The Zoom Feature", chapter 6.1.1.
Zoom Out − Redraws the current view at a scale one−and−one−half times
larger. Please see " The Zoom Feature", chapter 6.1.1.
Center on Ship − Centers the display on the ship's location. Please see
"Using the Scale and Center Command", chapter 6.1.4.
Free EBL − Allows you to draw an electronic bearing line which displays the
range and bearing from one point to another. Please see "Electronic
Bearing Line", chapter 9.1.1.
Fixed EBL − Allows you to draw an electronic bearing line which displays
the range and bearing from the ship to a set point. Please see "Electronic
Bearing Line", chapter 9.1.1.
Mark At Ship − Places a mark at the ship's current location. Please see
"Placing Ship Marks", chapter 7.1.7.
ECDIS
5 6 7 8
Tool Bar
2−25
R
Raytheon Anschütz GmbH
Germany
9 10 11 12 13
3655DOC020102