Raytheon Pathfinder ECDIS Operator's Manual page 140

SemAuto Updating
3655DOC020102
Operator Manual
The user can check the updates and then expand the update on
the various objects in the chart. The chart will automatically pan
and highlight the location of the object as shown above.
Used for S57 charts.
Click on the SemiAuto Updating, the following dialog box
appears. In this context the update will be done by floppy
disk or CD ROM disk.
Insert the disk into corresponding drive.
Select the disk icon in the dialog box by cursor.
Open the following folders, look for corresponding name and the
version no. indicated on the right side of the dialog box.
Figure: 4−52 SemiAuto Updating dialog box
Click on Start (see step1).
The dialog box is displayed as shown below. The compilation process is
started (see Figure: 4−52).
If the updating process is completed the dialog box is switched back to
its previous state.
4−68
step 1
Edition: 30.MAR.2007