Raytheon Pathfinder ECDIS Operator's Manual page 201

6.1.5 View Area Command
One of the fastest ways to reposition the display is to use ECDIS's View Area
feature. An Area is simply a display storing a combination of scale and center on
a specific chart that you have named and saved. You will find the View Area
feature especially helpful if there are certain geographic regions you display
frequently.
When you change the area you are viewing, your plot and route information
remains open. It is as if you are viewing a different part of the globe for a
moment.
ECDIS continues to monitor your route for unsafe and restricted areas while you
are viewing a different area. You may return to your open route at any time by
using the Show Route command under the Waypoints menu.
Edition: 30.MAR.2007
ECDIS
Operator Manual
Step 3 Step 3 Step 3 Step 3
Step 4 Step 3
Figure: 1−5 Scale and Center Dialog Box
6−7
R
Raytheon Anschütz GmbH
Germany
3655DOC020102