After correct selection of DNC path, the following dialog will displayed
automatically. The dialog shows the progress of verification.
If the verification is done, a summary will be displayed in the window. In case of
errors or warnings the corresponding messages will be shown in the report
window.
Edition: 30.MAR.2007
ECDIS
Operator Manual
This process takes time.
Figure: 4−47 Progress of Verification is running
Figure: 4−48 Report List
4−63
R
Raytheon Anschütz GmbH
Germany
Report messages.
In case of Critical Errors
the Installation Process
stops.
Please contact the chart
manufacturer DNC.
In case of Warnings the Instal-
lation Process is going on.
Warnings describes location
specific chart
information.
For questions, contact the chart
manufacture DNC.
3655DOC020102