Raytheon Pathfinder ECDIS Operator's Manual page 271

8.2.13.4 Stopping Track Control
If you want to depart from the track or interrupt track control in case of
emergency:
Procedure: (see Figure: 1−32)
Step 1 Select Track Control from the Routes menu.
Step 2 Move the cursor over the waypoint to which you want to navigate and
Step 3 Click on Yes. Track control is stopped.
Edition: 30.MAR.2007
ECDIS
Operator Manual
(Alterative selection, place the Target Cursor on a waypoint and click
the [Query] button.
Select Track Control from the menu box which appears)
click, or use the left and right arrow keys at the top left hand corner of
the dialog box.
The following message will appear
Figure: 1−32 Stopping Track Control Message Box
8−43
R
Raytheon Anschütz GmbH
Germany
3655DOC020102