Raytheon Pathfinder ECDIS Operator's Manual page 302

9.1.10 Distance−To−Run / Planned Position
Distance−To−Run
From this menu function a Distance−To−Run Interval can be defined.
It is appropriate to zoom out the chart such that the complete route is visible.
Procedure: (see Figure: 1−13)
Step 1 Select Distance−To−Run.. from the Nav Tools menu.
Step 2 Adjust the desired width of the interval either by typing it in or via the
Step 3 If the Enabled box is marked click on OK, corresponding labels are
3655DOC020102
Operator Manual
The Distance−To−Run dialog box appears
spinners.
displayed along the route indicating distances according to selected
interval.
Figure: 1−13
9−20
Step 2
Step 3
Distance−To−Run Enabled
Edition: 30.MAR.2007