Annex−1 - Raytheon Pathfinder ECDIS Operator's Manual

Route Planning with the Digitizer
The Digitizer is hereby used for planning official routes. Planned routes are
transferred to the ECDIS where they are managed by their designation.
15.1.2 Planning Station Version
The Planning Station Version consists of 1 ECDIS unit (Console or Table Top
Version), a Personal Computer (PC) or Table Top Version and a DIGITIZER (see
Annex – 8).
Sea Charts
The ECDIS is rated for taking over and displaying different digitized charts. For
non−officially approved chart formats an official redundant set of paper charts
shall be provided (see chapter 15.1).
Position Display
The redundant position display can only ensured in connection with the ECDIS
(operational area) since the secondary ECDIS (PC or Table Top Version) fea-
tures no inherent sensor feeding.
Route Planning
Route Planning with the ECDIS.
Routes may only be planned and navigated using officially approved and digi-
tized charts (S57) and in connection with an autopilot. The planning of routes
can be effected via both ECDIS systems. The ECDIS transfers the routes auto-
matically via the Ethernet.
Route Planning with the Digitizer
The Digitizer is used for planning official routes. Planned routes are transferred
to the ECDIS where they are managed by their designation.
Edition: 30.MAR.2007
ECDIS
Operator Manual
15−3
R
Raytheon Anschütz GmbH
Germany
3655DOC020102