Raytheon Pathfinder ECDIS Operator's Manual page 280

8.2.17 Check Route
Check Route considers the validity of objects limited in time in the sea chart
formats CM93/3 and S57.
Objects limited in time are:
Check Route is recommended for a check−over of a known route, for example,
that has to be sailed on a certain date.
It is possible that known routes were planned with an older chart version. With a
Chart Update, new situations can arise. Check Route examines the entire route
to that and effect and release alarm messages, if necessary. The individual route
sections are to be checked over (see chapter 8.2.1.2).
Procedure: (see Figure: 1−40)
Step 1 Select Open Route of the Routes menu, the dialog box appears.
Step 2 Click on either Open or Open and Show.
Step 3 Select Check Route of the Routes menu, the dialog box appears.
(only when a Primary Route selected)
3655DOC020102
Operator Manual
S Prohibited Areas
S Own Ships Contours
S Buoys and Beacons.
Select on the name route name of interest.
(Alterative double cklick on the route name will also open and
display the route)
Select a Date and click on Check Now.
The results will be displayed in the alarm window.
Figure: 1−40
8−52
(only when a Primary Route and Secondary Route selected)
Check Route
Edition: 30.MAR.2007